ReP USP - Resultado da busca

Parte de monografia/livro
Procedure for estimate tensile strength parallel to the grain of tropical wood species (2020)
Christoforo, André Luis ; Aquino, Vinicius Borges de Moura; Panzera, Túlio Hallak ; Lahr, Francisco Antonio Rocco
Source: New Ideas Concerning Science and Technology Vol. 1. Unidade: EESC
Subjects: RESISTÊNCIA A TRAÇÃO, MADEIRA, MÍNIMOS QUADRADOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Procedure for estimate tensile strength parallel to the grain of tropical wood species. New Ideas Concerning Science and Technology Vol. 1. Tradução . West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2020. . Disponível em: https://doi.org/10.9734/bpi/nicst/v1. Acesso em: 09 maio 2024.
APA
Christoforo, A. L., Aquino, V. B. de M., Panzera, T. H., & Lahr, F. A. R. (2020). Procedure for estimate tensile strength parallel to the grain of tropical wood species. In New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.9734/bpi/nicst/v1
NLM
Christoforo AL, Aquino VB de M, Panzera TH, Lahr FAR. Procedure for estimate tensile strength parallel to the grain of tropical wood species [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 09 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Vancouver
Christoforo AL, Aquino VB de M, Panzera TH, Lahr FAR. Procedure for estimate tensile strength parallel to the grain of tropical wood species [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 09 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Artigo de periodico
Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions (2020)
Santos, Sabrina Nicoleti Carvalho dos ; Almeida, Tiago Hendrigo de ; Sardela, Mauro R. ; Lahr, Francisco Antonio Rocco ; Gonçalves, Débora
Source: Journal of the Indian Academy of Wood Science. Unidades: EESC, IFSC
Subjects: MADEIRA, ENSAIOS NÃO DESTRUTIVOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Sabrina Nicoleti Carvalho dos et al. Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions. Journal of the Indian Academy of Wood Science, v. 17, n. 1, p. 46-53, 2020Tradução . . Disponível em: https://doi.org/10.1007/s13196-019-00253-w. Acesso em: 09 maio 2024.
APA
Santos, S. N. C. dos, Almeida, T. H. de, Sardela, M. R., Lahr, F. A. R., & Gonçalves, D. (2020). Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions. Journal of the Indian Academy of Wood Science, 17( 1), 46-53. doi:10.1007/s13196-019-00253-w
NLM
Santos SNC dos, Almeida TH de, Sardela MR, Lahr FAR, Gonçalves D. Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions [Internet]. Journal of the Indian Academy of Wood Science. 2020 ; 17( 1): 46-53.[citado 2024 maio 09 ] Available from: https://doi.org/10.1007/s13196-019-00253-w
Vancouver
Santos SNC dos, Almeida TH de, Sardela MR, Lahr FAR, Gonçalves D. Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions [Internet]. Journal of the Indian Academy of Wood Science. 2020 ; 17( 1): 46-53.[citado 2024 maio 09 ] Available from: https://doi.org/10.1007/s13196-019-00253-w
Artigo de periodico
Dosage of dry mixed rubberized sma by bailey method (2020)
Curvelo Júnior, José Carlos Dias; Campelo, Nilton de Souza; Vieira, Adalena Kennedy; Fernandes Júnior, José Leomar; Souza, Elias Santos
Source: International Journal of Modern Engineering Research. Unidade: EESC
Subjects: PAVIMENTAÇÃO ASFÁLTICA, ASFALTO, BORRACHA, RESÍDUOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CURVELO JÚNIOR, José Carlos Dias et al. Dosage of dry mixed rubberized sma by bailey method. International Journal of Modern Engineering Research, v. 10, n. 1, p. 25-38, 2020Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/4db00512-2503-44de-8654-7615c0d97bf1/sysno3166164_%5BArt%20per%5D%20Curvelo%20Jr_Dosage%20of%20Dry%20%20Mixed%20Rubberized.pdf. Acesso em: 09 maio 2024.
APA
Curvelo Júnior, J. C. D., Campelo, N. de S., Vieira, A. K., Fernandes Júnior, J. L., & Souza, E. S. (2020). Dosage of dry mixed rubberized sma by bailey method. International Journal of Modern Engineering Research, 10( 1), 25-38. Recuperado de https://repositorio.usp.br/directbitstream/4db00512-2503-44de-8654-7615c0d97bf1/sysno3166164_%5BArt%20per%5D%20Curvelo%20Jr_Dosage%20of%20Dry%20%20Mixed%20Rubberized.pdf
NLM
Curvelo Júnior JCD, Campelo N de S, Vieira AK, Fernandes Júnior JL, Souza ES. Dosage of dry mixed rubberized sma by bailey method [Internet]. International Journal of Modern Engineering Research. 2020 ; 10( 1): 25-38.[citado 2024 maio 09 ] Available from: https://repositorio.usp.br/directbitstream/4db00512-2503-44de-8654-7615c0d97bf1/sysno3166164_%5BArt%20per%5D%20Curvelo%20Jr_Dosage%20of%20Dry%20%20Mixed%20Rubberized.pdf
Vancouver
Curvelo Júnior JCD, Campelo N de S, Vieira AK, Fernandes Júnior JL, Souza ES. Dosage of dry mixed rubberized sma by bailey method [Internet]. International Journal of Modern Engineering Research. 2020 ; 10( 1): 25-38.[citado 2024 maio 09 ] Available from: https://repositorio.usp.br/directbitstream/4db00512-2503-44de-8654-7615c0d97bf1/sysno3166164_%5BArt%20per%5D%20Curvelo%20Jr_Dosage%20of%20Dry%20%20Mixed%20Rubberized.pdf
Parte de monografia/livro
Studies on the stiffness properties of Pinus caribaea round timber logs (2020)
Zangiácomo, André Luiz; Aquino, Vinicius Borges de Moura; Christoforo, André Luis ; Lahr, Francisco Antonio Rocco
Source: New Ideas Concerning Science and Technology Vol. 1. Unidade: EESC
Subjects: MADEIRA, ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANGIÁCOMO, André Luiz et al. Studies on the stiffness properties of Pinus caribaea round timber logs. New Ideas Concerning Science and Technology Vol. 1. Tradução . West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2020. . Disponível em: https://doi.org/10.9734/bpi/nicst/v1. Acesso em: 09 maio 2024.
APA
Zangiácomo, A. L., Aquino, V. B. de M., Christoforo, A. L., & Lahr, F. A. R. (2020). Studies on the stiffness properties of Pinus caribaea round timber logs. In New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.9734/bpi/nicst/v1
NLM
Zangiácomo AL, Aquino VB de M, Christoforo AL, Lahr FAR. Studies on the stiffness properties of Pinus caribaea round timber logs [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 09 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Vancouver
Zangiácomo AL, Aquino VB de M, Christoforo AL, Lahr FAR. Studies on the stiffness properties of Pinus caribaea round timber logs [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 09 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Artigo de periodico
Correlation between density and porosity from ten species of tropical wood (2020)
Duarte, Bárbara Branquinho ; Lahr, Francisco Antonio Rocco ; Nascimento, Maria Fátima; Christoforo, André Luis
Source: International Journal of Engineering Research and Applications. Unidade: EESC
Subjects: DENSIDADE DA MADEIRA, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DUARTE, Bárbara Branquinho et al. Correlation between density and porosity from ten species of tropical wood. International Journal of Engineering Research and Applications, v. 10, n. 3, p. 30-32, 2020Tradução . . Disponível em: https://doi.org/10.9790/9622-1003023032. Acesso em: 09 maio 2024.
APA
Duarte, B. B., Lahr, F. A. R., Nascimento, M. F., & Christoforo, A. L. (2020). Correlation between density and porosity from ten species of tropical wood. International Journal of Engineering Research and Applications, 10( 3), 30-32. doi:10.9790/9622-1003023032
NLM
Duarte BB, Lahr FAR, Nascimento MF, Christoforo AL. Correlation between density and porosity from ten species of tropical wood [Internet]. International Journal of Engineering Research and Applications. 2020 ; 10( 3): 30-32.[citado 2024 maio 09 ] Available from: https://doi.org/10.9790/9622-1003023032
Vancouver
Duarte BB, Lahr FAR, Nascimento MF, Christoforo AL. Correlation between density and porosity from ten species of tropical wood [Internet]. International Journal of Engineering Research and Applications. 2020 ; 10( 3): 30-32.[citado 2024 maio 09 ] Available from: https://doi.org/10.9790/9622-1003023032
Artigo de periodico
On pilot studies for robotic therapy: the relevance of healthy subjects’ motor control responses to protocol design (2019)
Silva-Couto, Marcela A ; Siqueira, Adriano Almeida Gonçalves
Source: Journal of Mechanical Engineering and Biomechanics. Unidade: EESC
Subjects: SISTEMA NERVOSO, TORNOZELO, ROBÓTICA, TECNOLOGIAS DA SAÚDE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA-COUTO, Marcela A e SIQUEIRA, Adriano Almeida Gonçalves. On pilot studies for robotic therapy: the relevance of healthy subjects’ motor control responses to protocol design. Journal of Mechanical Engineering and Biomechanics, v. 4, n. 2, p. 25-30, 2019Tradução . . Disponível em: https://doi.org/10.24243/JMEB/4.2.206_X. Acesso em: 09 maio 2024.
APA
Silva-Couto, M. A., & Siqueira, A. A. G. (2019). On pilot studies for robotic therapy: the relevance of healthy subjects’ motor control responses to protocol design. Journal of Mechanical Engineering and Biomechanics, 4( 2), 25-30. doi:10.24243/JMEB/4.2.206_X
NLM
Silva-Couto MA, Siqueira AAG. On pilot studies for robotic therapy: the relevance of healthy subjects’ motor control responses to protocol design [Internet]. Journal of Mechanical Engineering and Biomechanics. 2019 ; 4( 2): 25-30.[citado 2024 maio 09 ] Available from: https://doi.org/10.24243/JMEB/4.2.206_X
Vancouver
Silva-Couto MA, Siqueira AAG. On pilot studies for robotic therapy: the relevance of healthy subjects’ motor control responses to protocol design [Internet]. Journal of Mechanical Engineering and Biomechanics. 2019 ; 4( 2): 25-30.[citado 2024 maio 09 ] Available from: https://doi.org/10.24243/JMEB/4.2.206_X
Artigo de periodico
A comparative analysis of PID, fuzzy and H infinity controllers applied to a stewart platform (2019)
Breganon, Ricardo; Montezuma, Marcio Aurelio Furtado ; Souza, Mateus Moreira de; Lemes, Rodrigo Cristian; Belo, Eduardo Morgado
Source: International Journal of Advanced Engineering Research and Science. Unidade: EESC
Subjects: CONTROLADORES PROGRAMÁVEIS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BREGANON, Ricardo et al. A comparative analysis of PID, fuzzy and H infinity controllers applied to a stewart platform. International Journal of Advanced Engineering Research and Science, v. 6, n. 3, p. 25-32, 2019Tradução . . Disponível em: https://doi.org/10.22161/ijaers.6.3.5. Acesso em: 09 maio 2024.
APA
Breganon, R., Montezuma, M. A. F., Souza, M. M. de, Lemes, R. C., & Belo, E. M. (2019). A comparative analysis of PID, fuzzy and H infinity controllers applied to a stewart platform. International Journal of Advanced Engineering Research and Science, 6( 3), 25-32. doi:10.22161/ijaers.6.3.5
NLM
Breganon R, Montezuma MAF, Souza MM de, Lemes RC, Belo EM. A comparative analysis of PID, fuzzy and H infinity controllers applied to a stewart platform [Internet]. International Journal of Advanced Engineering Research and Science. 2019 ; 6( 3): 25-32.[citado 2024 maio 09 ] Available from: https://doi.org/10.22161/ijaers.6.3.5
Vancouver
Breganon R, Montezuma MAF, Souza MM de, Lemes RC, Belo EM. A comparative analysis of PID, fuzzy and H infinity controllers applied to a stewart platform [Internet]. International Journal of Advanced Engineering Research and Science. 2019 ; 6( 3): 25-32.[citado 2024 maio 09 ] Available from: https://doi.org/10.22161/ijaers.6.3.5
Artigo de periodico
Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters) (2019)
Oliveira, Gabriel Oberon Bertoldi; Pinheiro, Roberto Vasconcelos; Arroyo, Felipe Nascimento; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Silva, Diogo Aparecido Lopes; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: MADEIRA, COBERTURAS, TRELIÇAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Gabriel Oberon Bertoldi et al. Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters). Current Journal of Applied Science and Technology, v. 35, n. 4, p. 1-8, 2019Tradução . . Disponível em: https://doi.org/10.9734/cjast/2019/v35i430188. Acesso em: 09 maio 2024.
APA
Oliveira, G. O. B., Pinheiro, R. V., Arroyo, F. N., Almeida, D. H. de, Almeida, T. H. de, Silva, D. A. L., et al. (2019). Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters). Current Journal of Applied Science and Technology, 35( 4), 1-8. doi:10.9734/cjast/2019/v35i430188
NLM
Oliveira GOB, Pinheiro RV, Arroyo FN, Almeida DH de, Almeida TH de, Silva DAL, Christoforo AL, Lahr FAR. Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters) [Internet]. Current Journal of Applied Science and Technology. 2019 ; 35( 4): 1-8.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/cjast/2019/v35i430188
Vancouver
Oliveira GOB, Pinheiro RV, Arroyo FN, Almeida DH de, Almeida TH de, Silva DAL, Christoforo AL, Lahr FAR. Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters) [Internet]. Current Journal of Applied Science and Technology. 2019 ; 35( 4): 1-8.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/cjast/2019/v35i430188
Artigo de periodico
Comparison of hand segmentation approaches in grasp images obtained with an omnidirectional vision system (2019)
Perissini, Ivan Carlos ; Appel, Viviane Cristina Roma ; Rezende, Matheus Bizinotto; Pedro, Leonardo Marquez; Caurin, Glauco Augusto de Paula
Source: Journal of Mechanical Engineering and Biomechanics. Unidade: EESC
Subjects: MEMBROS SUPERIORES, PELE, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PERISSINI, Ivan Carlos et al. Comparison of hand segmentation approaches in grasp images obtained with an omnidirectional vision system. Journal of Mechanical Engineering and Biomechanics, v. 4, n. 2, p. 18-28, 2019Tradução . . Disponível em: https://doi.org/10.24243/JMEB/4.2.210. Acesso em: 09 maio 2024.
APA
Perissini, I. C., Appel, V. C. R., Rezende, M. B., Pedro, L. M., & Caurin, G. A. de P. (2019). Comparison of hand segmentation approaches in grasp images obtained with an omnidirectional vision system. Journal of Mechanical Engineering and Biomechanics, 4( 2), 18-28. doi:10.24243/JMEB/4.2.210
NLM
Perissini IC, Appel VCR, Rezende MB, Pedro LM, Caurin GA de P. Comparison of hand segmentation approaches in grasp images obtained with an omnidirectional vision system [Internet]. Journal of Mechanical Engineering and Biomechanics. 2019 ; 4( 2): 18-28.[citado 2024 maio 09 ] Available from: https://doi.org/10.24243/JMEB/4.2.210
Vancouver
Perissini IC, Appel VCR, Rezende MB, Pedro LM, Caurin GA de P. Comparison of hand segmentation approaches in grasp images obtained with an omnidirectional vision system [Internet]. Journal of Mechanical Engineering and Biomechanics. 2019 ; 4( 2): 18-28.[citado 2024 maio 09 ] Available from: https://doi.org/10.24243/JMEB/4.2.210
Artigo de periodico
Control of exoskeleton for lower limbs and influence on kinetic and muscular properties by using motor primitives (2019)
Nunes, Polyana Ferreira; Peña, Guido Gomez; Siqueira, Adriano Almeida Gonçalves ; Santos, Wilian Miranda dos
Source: Journal of Mechanical Engineering and Biomechanics. Unidade: EESC
Subjects: ROBÓTICA, SISTEMA NERVOSO, SISTEMA NERVOSO, TECNOLOGIAS DA SAÚDE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NUNES, Polyana Ferreira et al. Control of exoskeleton for lower limbs and influence on kinetic and muscular properties by using motor primitives. Journal of Mechanical Engineering and Biomechanics, v. 4, n. 2, p. 31-38, 2019Tradução . . Disponível em: https://doi.org/10.24243/JMEB/4.2.210_X. Acesso em: 09 maio 2024.
APA
Nunes, P. F., Peña, G. G., Siqueira, A. A. G., & Santos, W. M. dos. (2019). Control of exoskeleton for lower limbs and influence on kinetic and muscular properties by using motor primitives. Journal of Mechanical Engineering and Biomechanics, 4( 2), 31-38. doi:10.24243/JMEB/4.2.210_X
NLM
Nunes PF, Peña GG, Siqueira AAG, Santos WM dos. Control of exoskeleton for lower limbs and influence on kinetic and muscular properties by using motor primitives [Internet]. Journal of Mechanical Engineering and Biomechanics. 2019 ; 4( 2): 31-38.[citado 2024 maio 09 ] Available from: https://doi.org/10.24243/JMEB/4.2.210_X
Vancouver
Nunes PF, Peña GG, Siqueira AAG, Santos WM dos. Control of exoskeleton for lower limbs and influence on kinetic and muscular properties by using motor primitives [Internet]. Journal of Mechanical Engineering and Biomechanics. 2019 ; 4( 2): 31-38.[citado 2024 maio 09 ] Available from: https://doi.org/10.24243/JMEB/4.2.210_X
Artigo de periodico
Design and execution of wood-concrete deck bridge (2018)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: PONTES DE MADEIRA, ESTRUTURAS MISTAS, ESTRUTURAS DE CONCRETO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Design and execution of wood-concrete deck bridge. Current Journal of Applied Science and Technology, v. 28, n. 3, p. 1-10, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42784. Acesso em: 09 maio 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, Calil Júnior, C., & Lahr, F. A. R. (2018). Design and execution of wood-concrete deck bridge. Current Journal of Applied Science and Technology, 28( 3), 1-10. doi:10.9734/CJAST/2018/42784
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Design and execution of wood-concrete deck bridge [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 3): 1-10.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42784
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Design and execution of wood-concrete deck bridge [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 3): 1-10.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42784
Artigo de periodico
Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species (2018)
Almeida, Andréa de Souza; Lanini, Tamiris Luiza Soares; Caetano, Juliana Argente; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: MADEIRA, ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Andréa de Souza et al. Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species. Current Journal of Applied Science and Technology, v. 28, n. 5, p. 1-7, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42945. Acesso em: 09 maio 2024.
APA
Almeida, A. de S., Lanini, T. L. S., Caetano, J. A., Christoforo, A. L., & Lahr, F. A. R. (2018). Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species. Current Journal of Applied Science and Technology, 28( 5), 1-7. doi:10.9734/CJAST/2018/42945
NLM
Almeida A de S, Lanini TLS, Caetano JA, Christoforo AL, Lahr FAR. Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-7.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42945
Vancouver
Almeida A de S, Lanini TLS, Caetano JA, Christoforo AL, Lahr FAR. Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-7.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42945
Artigo de periodico
Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens (2018)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: CONEXÕES ESTRUTURAIS, ESTRUTURAS DE MADEIRA, ESTRUTURAS MISTAS, ESTRUTURAS DE CONCRETO, CISALHAMENTO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens. Current Journal of Applied Science and Technology, v. 28, n. 5, p. 1-8, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/43127. Acesso em: 09 maio 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, Calil Júnior, C., & Lahr, F. A. R. (2018). Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens. Current Journal of Applied Science and Technology, 28( 5), 1-8. doi:10.9734/CJAST/2018/43127
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-8.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/43127
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-8.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/43127
Artigo de periodico
Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber (2018)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: ESTRUTURAS, ESTRUTURAS DE MADEIRA, CONEXÕES ESTRUTURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber. Current Journal of Applied Science and Technology, v. 28, n. 6, p. 1-9, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42970. Acesso em: 09 maio 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, Calil Júnior, C., & Lahr, F. A. R. (2018). Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber. Current Journal of Applied Science and Technology, 28( 6), 1-9. doi:10.9734/CJAST/2018/42970
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 6): 1-9.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42970
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 6): 1-9.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42970
Artigo de periodico
Redesign of an experimental Unmanned Aerial Vehicle (UAV) for its conversion into an operational laboratory platform (2018)
White, Philippe; Vaca, John; Villalba, Jorge; Martinez, Diego; Pardo, Gerardo; Cerón Muñoz, Hernán Darío
Source: International Journal of Applied Enginering Research. Unidade: EESC
Subjects: AERONAVES NÃO TRIPULADAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
WHITE, Philippe et al. Redesign of an experimental Unmanned Aerial Vehicle (UAV) for its conversion into an operational laboratory platform. International Journal of Applied Enginering Research, v. 13, n. 23, p. 16438-16446, 2018Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/b4c197e2-f162-4d99-a5bc-8ea9e8b28e47/artigo%2003%20-%20Redesign%20of%20an%20experimental%20Unmanned%20Aerial%20Vehicle%20%28UAV%29%20for%20its%20conversion%20into%20an%20operational%20laboratory%20platform%20%28INTERNATIONAL%20JOURNAL%20OF%20APPLIED%20ENGINEERING%20RESEARCH%29.pdf. Acesso em: 09 maio 2024.
APA
White, P., Vaca, J., Villalba, J., Martinez, D., Pardo, G., & Cerón Muñoz, H. D. (2018). Redesign of an experimental Unmanned Aerial Vehicle (UAV) for its conversion into an operational laboratory platform. International Journal of Applied Enginering Research, 13( 23), 16438-16446. Recuperado de https://repositorio.usp.br/directbitstream/b4c197e2-f162-4d99-a5bc-8ea9e8b28e47/artigo%2003%20-%20Redesign%20of%20an%20experimental%20Unmanned%20Aerial%20Vehicle%20%28UAV%29%20for%20its%20conversion%20into%20an%20operational%20laboratory%20platform%20%28INTERNATIONAL%20JOURNAL%20OF%20APPLIED%20ENGINEERING%20RESEARCH%29.pdf
NLM
White P, Vaca J, Villalba J, Martinez D, Pardo G, Cerón Muñoz HD. Redesign of an experimental Unmanned Aerial Vehicle (UAV) for its conversion into an operational laboratory platform [Internet]. International Journal of Applied Enginering Research. 2018 ; 13( 23): 16438-16446.[citado 2024 maio 09 ] Available from: https://repositorio.usp.br/directbitstream/b4c197e2-f162-4d99-a5bc-8ea9e8b28e47/artigo%2003%20-%20Redesign%20of%20an%20experimental%20Unmanned%20Aerial%20Vehicle%20%28UAV%29%20for%20its%20conversion%20into%20an%20operational%20laboratory%20platform%20%28INTERNATIONAL%20JOURNAL%20OF%20APPLIED%20ENGINEERING%20RESEARCH%29.pdf
Vancouver
White P, Vaca J, Villalba J, Martinez D, Pardo G, Cerón Muñoz HD. Redesign of an experimental Unmanned Aerial Vehicle (UAV) for its conversion into an operational laboratory platform [Internet]. International Journal of Applied Enginering Research. 2018 ; 13( 23): 16438-16446.[citado 2024 maio 09 ] Available from: https://repositorio.usp.br/directbitstream/b4c197e2-f162-4d99-a5bc-8ea9e8b28e47/artigo%2003%20-%20Redesign%20of%20an%20experimental%20Unmanned%20Aerial%20Vehicle%20%28UAV%29%20for%20its%20conversion%20into%20an%20operational%20laboratory%20platform%20%28INTERNATIONAL%20JOURNAL%20OF%20APPLIED%20ENGINEERING%20RESEARCH%29.pdf
Artigo de periodico
Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood (2018)
Pigozzo, Julio César; Chahud, Eduardo; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: CONEXÕES ESTRUTURAIS, ESTRUTURAS DE MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood. Current Journal of Applied Science and Technology, v. 28, n. 5, p. 1-6, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42993. Acesso em: 09 maio 2024.
APA
Pigozzo, J. C., Chahud, E., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, & Lahr, F. A. R. (2018). Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood. Current Journal of Applied Science and Technology, 28( 5), 1-6. doi:10.9734/CJAST/2018/42993
NLM
Pigozzo JC, Chahud E, Arroyo FN, Christoforo AL, Almeida DH de, Lahr FAR. Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-6.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42993
Vancouver
Pigozzo JC, Chahud E, Arroyo FN, Christoforo AL, Almeida DH de, Lahr FAR. Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-6.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/42993
Artigo de periodico
Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA (2018)
Moreno, João Roberto Sartori; Pinto, Haroldo Cavalcanti ; Correa, C. A.; Mastelari, N.; Marin, L. G.; Silva, E.; Avila, J. A.
Source: International Journal of Advanced Engineering Research and Science. Unidade: EESC
Subjects: AÇO, SOLDAGEM A ARCO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORENO, João Roberto Sartori et al. Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA. International Journal of Advanced Engineering Research and Science, v. 5, n. 5, p. 150-157, 2018Tradução . . Disponível em: https://doi.org/10.22161/ijaers.5.5.20. Acesso em: 09 maio 2024.
APA
Moreno, J. R. S., Pinto, H. C., Correa, C. A., Mastelari, N., Marin, L. G., Silva, E., & Avila, J. A. (2018). Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA. International Journal of Advanced Engineering Research and Science, 5( 5), 150-157. doi:10.22161/ijaers.5.5.20
NLM
Moreno JRS, Pinto HC, Correa CA, Mastelari N, Marin LG, Silva E, Avila JA. Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA [Internet]. International Journal of Advanced Engineering Research and Science. 2018 ; 5( 5): 150-157.[citado 2024 maio 09 ] Available from: https://doi.org/10.22161/ijaers.5.5.20
Vancouver
Moreno JRS, Pinto HC, Correa CA, Mastelari N, Marin LG, Silva E, Avila JA. Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA [Internet]. International Journal of Advanced Engineering Research and Science. 2018 ; 5( 5): 150-157.[citado 2024 maio 09 ] Available from: https://doi.org/10.22161/ijaers.5.5.20
Artigo de periodico
Evaluation of the number of load cycles to determine some wood stiffness properties (2018)
Morales, Elen Aparecida Martines; Almeida, Diego Henrique de; Christoforo, André Luis; Panzera, Tulio Hallak; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: ESTRUTURAS, MADEIRA, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORALES, Elen Aparecida Martines et al. Evaluation of the number of load cycles to determine some wood stiffness properties. Current Journal of Applied Science and Technology, v. 29, n. 1, p. 1-7, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/43486. Acesso em: 09 maio 2024.
APA
Morales, E. A. M., Almeida, D. H. de, Christoforo, A. L., Panzera, T. H., & Lahr, F. A. R. (2018). Evaluation of the number of load cycles to determine some wood stiffness properties. Current Journal of Applied Science and Technology, 29( 1), 1-7. doi:10.9734/CJAST/2018/43486
NLM
Morales EAM, Almeida DH de, Christoforo AL, Panzera TH, Lahr FAR. Evaluation of the number of load cycles to determine some wood stiffness properties [Internet]. Current Journal of Applied Science and Technology. 2018 ; 29( 1): 1-7.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/43486
Vancouver
Morales EAM, Almeida DH de, Christoforo AL, Panzera TH, Lahr FAR. Evaluation of the number of load cycles to determine some wood stiffness properties [Internet]. Current Journal of Applied Science and Technology. 2018 ; 29( 1): 1-7.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/43486
Artigo de periodico
Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density (2018)
Cavalheiro, Raquel Schmitt; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: British Journal of Applied Science & Technology. Unidade: EESC
Subjects: ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS DE MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAVALHEIRO, Raquel Schmitt et al. Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density. British Journal of Applied Science & Technology, v. 26, n. 1, p. 1-8, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/39531. Acesso em: 09 maio 2024.
APA
Cavalheiro, R. S., Almeida, D. H. de, Almeida, T. H. de, Christoforo, A. L., & Lahr, F. A. R. (2018). Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density. British Journal of Applied Science & Technology, 26( 1), 1-8. doi:10.9734/CJAST/2018/39531
NLM
Cavalheiro RS, Almeida DH de, Almeida TH de, Christoforo AL, Lahr FAR. Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density [Internet]. British Journal of Applied Science & Technology. 2018 ; 26( 1): 1-8.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/39531
Vancouver
Cavalheiro RS, Almeida DH de, Almeida TH de, Christoforo AL, Lahr FAR. Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density [Internet]. British Journal of Applied Science & Technology. 2018 ; 26( 1): 1-8.[citado 2024 maio 09 ] Available from: https://doi.org/10.9734/CJAST/2018/39531
Artigo de periodico
A study of the temporal flow of passenger and cargo transport in a Brazilian region: use of different statistical models for better forecasts and discovery of important factors that affect the efficiency of the Brazilian air transport system (2018)
Bonette, Luiz Rodrigo; Azzolini Júnior, Walter ; Achcar, Jorge Alberto
Source: International Journal of Modern Research in Engineering and Technology (IJMRET). Unidades: EESC, FMRP
Subjects: ESTATÍSTICA APLICADA, MODELOS (ANÁLISE MULTIVARIADA), TRANSPORTE AÉREO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BONETTE, Luiz Rodrigo e AZZOLINI JÚNIOR, Walter e ACHCAR, Jorge Alberto. A study of the temporal flow of passenger and cargo transport in a Brazilian region: use of different statistical models for better forecasts and discovery of important factors that affect the efficiency of the Brazilian air transport system. International Journal of Modern Research in Engineering and Technology (IJMRET), v. 3, n. 7, p. 35-56, 2018Tradução . . Disponível em: https://www.academia.edu/38109212/A_study_of_the_temporal_flow_of_passenger_and_cargo_transport_in_a_Brazilian_region_use_of_different_statistical_models_for_better_forecasts_and_discovery_of_important_factors_that_affect_the_efficiency_of_the_Brazilian_air_transport_system. Acesso em: 09 maio 2024.
APA
Bonette, L. R., Azzolini Júnior, W., & Achcar, J. A. (2018). A study of the temporal flow of passenger and cargo transport in a Brazilian region: use of different statistical models for better forecasts and discovery of important factors that affect the efficiency of the Brazilian air transport system. International Journal of Modern Research in Engineering and Technology (IJMRET), 3( 7), 35-56. Recuperado de https://www.academia.edu/38109212/A_study_of_the_temporal_flow_of_passenger_and_cargo_transport_in_a_Brazilian_region_use_of_different_statistical_models_for_better_forecasts_and_discovery_of_important_factors_that_affect_the_efficiency_of_the_Brazilian_air_transport_system
NLM
Bonette LR, Azzolini Júnior W, Achcar JA. A study of the temporal flow of passenger and cargo transport in a Brazilian region: use of different statistical models for better forecasts and discovery of important factors that affect the efficiency of the Brazilian air transport system [Internet]. International Journal of Modern Research in Engineering and Technology (IJMRET). 2018 ; 3( 7): 35-56.[citado 2024 maio 09 ] Available from: https://www.academia.edu/38109212/A_study_of_the_temporal_flow_of_passenger_and_cargo_transport_in_a_Brazilian_region_use_of_different_statistical_models_for_better_forecasts_and_discovery_of_important_factors_that_affect_the_efficiency_of_the_Brazilian_air_transport_system
Vancouver
Bonette LR, Azzolini Júnior W, Achcar JA. A study of the temporal flow of passenger and cargo transport in a Brazilian region: use of different statistical models for better forecasts and discovery of important factors that affect the efficiency of the Brazilian air transport system [Internet]. International Journal of Modern Research in Engineering and Technology (IJMRET). 2018 ; 3( 7): 35-56.[citado 2024 maio 09 ] Available from: https://www.academia.edu/38109212/A_study_of_the_temporal_flow_of_passenger_and_cargo_transport_in_a_Brazilian_region_use_of_different_statistical_models_for_better_forecasts_and_discovery_of_important_factors_that_affect_the_efficiency_of_the_Brazilian_air_transport_system

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration